Onicon F-3200 Series Manual de usuario descargar pdf (Pagina 37)

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]

F-3200 Flow Meter Manual 05/14 - 0671-12 / 18325 Page A-1

Step 1

Remove rear cover.

Section 1: Removing the Transmitter

Before attempting to remote mount the transmitter, disconnect power at the source.

Step 6

Remove mounting screws from the

bottom of the enclosure. Screws do

not need to be fully removed.

Step 7

Carefully separate the electronics

enclosure from the sensor body.

As the two come apart, feed the

sensor wires through the opening

in the bottom of the enclosure.

Step 3

Remove power connector from

its socket. Remove wires from the

connector and set aside.

Step 2

Open rear compartment to

expose power connection.

Step 5

Remove electrode and coil wires

from connectors and set aside.

Step 4

Remove electrode and coil

connectors from their sockets.

Field Remote Mounting the Transmitter

Wiring Instructions

1 2 ... 32 33 34 35 36 37 38 39 40

Sin comentarios

Onicon F-3200 Series Manual de usuario Pagina 37