Onicon System-30 MODBUS BTU Manual de usuario Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 46
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
11451 South Belcher Road, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]
System-30 BTU Measurement System MODBUS RTU RS485 04/14 - 0583-1 / 18345 Page 27
4.6 BIASING AND TERMINATION
The ONICON System-30-MOD BTU Meter does not provide biasing voltage to the RS-485
network. A jumper selectable 120 ohm resistor is provided as shown below. The termination
resistor should only be used when the meter is installed at the end of the line.
120
termination
resister jumper
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 45 46

Comentarios a estos manuales

Sin comentarios