Onicon F-2600 Manual de usuario descargar pdf (Pagina 94)

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]

F-2600 & F-2700 Vortex Flow Meter Manual 02/15 - 0808-7 / 19204 Page 94

4.3.3.3. Binary Input Object:

Vortex Mass Flow Meters Binary Input type objects are described

in the below Table.

Object Instance Object Name Description

1 Alarm1 The status of the three alarms may be monitored via the Modbus

command. The value returned indicates the state of the alarm, and will be

1 only if the alarm is enabled and active. A zero value is transmitted for

alarms that are either disabled or inactive

2 Alarm2

3 Alarm3

4 External TBD

Note - Binary Input 4, Present value always read zero, because no information available from

client, so the polarity property doesn’t impact on Present value property when the Out of

service property is false.

3.4. Binary Value Object:

Vortex Mass Flow Meters Binary Value type objects are described

in the below Table.

Object Instance Object Name Description

1 Reset Reset's Totalizer

4.3.4. ANNEX - BACnet PROTOCOL IMPLEMENTATION CONFORMANCE STATEMENT

Date: 19-April-2012

Vendor Name: ONICON Incorporated

Product Name: F-2000 Series Vortex Meter

Product Model Number: F-2600 / F-2700

Applications Software Version: 1.07

Firmware Revision: N/A

BACnet Protocol Revision: 4

Product Description: Multivariable Vortex Flow Meter

BACnet Standardized Device Prole (Annex L):

BACnet Operator Workstation (B-OWS)

 BACnet Advanced Operator Workstation (B-AWS)

 BACnet Operator Display (B-OD)

 BACnet Building Controller (B-BC)

 BACnet Advanced Application Controller (B-AAC)

√ BACnet Application Specic Controller (B-ASC)

 BACnet Smart Sensor (B-SS)

 BACnet Smart Actuator (B-SA)

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 130 131

Sin comentarios

Onicon F-2600 Manual de usuario Pagina 94